结构形状优化与智能模型化

阻碍形状优化软件广泛应用的障碍之一是依据自然设计度量描述和建立设计模型、分析模型、优化模型以及实现三个模型之间的转换.本文称这一困难为结构形状优优设计软件的适用性.本文提出了一种方法用来动态地确定平面连续体结构形状优化过程中的边界,应用基于人工智能方法的启发式规则与技术,自动生成由设计单元法表示的几何模型,也就是将一个结构自动剖分成若干个大的四边形映射单元.这些大单元对于进一步的网络生成是必要的,同时也是向全自动计算机辅助形状优化系统前进的重要一步.     

Interfacial crack between elastic half-spaces under harmonic loading

A system of boundary integral equations that allows evaluating the displacement and stress fields for an interfacial crack under harmonic loading is presented. Expressions for the integral kernels are obtained. A numerical solution for a penny-shaped crack between steel and aluminum half-spaces under normally incident compression-rarefaction wave is given __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 8, pp. 47–56, July 2007.     

Multiple Scales via Galerkin Projections: Approximate Asymptotics for Strongly Nonlinear Oscillations

The method of multiple scales and the related method of averaging are commonly used tostudy slowly modulated oscillations. If the system of interest is a slightlyperturbed harmonic oscillator, then these techniques can be applied easily. If the unperturbed system is strongly nonlinear (though possiblyconservative), then these methods can run into difficulties due to the impossibilityof carrying out required analytical operations in closed form.In this paper, we abandon the requirement of closed form analyticaltreatment at all stages. Instead, Galerkin projections are used toobtain approximate realizations of the method of multiple scales. Thispaper adapts recent work using similar ideas for approximaterealizations of the method of averaging. A key contribution of thepresent work is in the systematic identification and removal of secularterms in the general nonlinear case, a procedure that is more difficultthan for the perturbed harmonic oscillator case, and that is unnecessaryfor averaging.A strength of the present work is that the heuristics (Galerkin)and asymptotics (multiple scales) are kept distinct,leaving room for systematic refinement of the formerwithout compromising the asymptotic features of the latter.     

Three-Dimensional Dynamic Contact Problem for an Elliptic Crack Interacting with a Normally Incident Harmonic Compression–Expansion Wave

The paper deals with the three-dimensional dynamic problem for an elliptic crack interacting with a normally incident harmonic compression–expansion wave, considering the contact interaction of the crack faces. An asymmetric solution is obtained using an iteration algorithm developed earlier. Numerical results are presented     

有限元网格自动生成及自动调整技术

本文给出了一种任意平面域内三角形网格自动生成及自动调整算法，并编制了相应的程序。通过对带Ｕ形槽的三点变曲试件的分析，证明本文算法是可行的，并且具有稳定性能好、收敛速度快的优点。     

The Secondary Bifurcation of an Aeroelastic Airfoil Motion: Effect of High Harmonics

The nonlinear dynamical response of a two-degree-of-freedom aeroelastic airfoil motion with cubic restoring forces is investigated. A secondary bifurcation after the primary Hopf (flutter) bifurcation is detected for a cubic hard spring in the pitch degree-of-freedom. Furthermore, there is a hysteresis in the secondary bifurcation: starting from different initial conditions the motion may jump from one limit cycle to another at different fluid flow velocities. A high-order harmonic balance method is employed to investigate the possible bifurcation branches. Furthermore, a numerical time simulation procedure is used to confirm the stable and unstable bifurcation branches.     

移动简谐荷载作用下桥梁响应的高效计算

在计算移动荷载过桥问题中广泛使用的Newmark方法必须在每一时间步内限制荷载的大小和作用位置都不能改变。精细积分法虽然允许荷载的大小在每一时间步长内发生变化,但是仍假定其作用位置是不变的,未能采取措施以描述荷载沿着桥面的连续移动性。本文提出三种精细积分格式,在每一时间步内不但允许移动荷载的大小按简谐规律连续变化,而且模拟了简谐荷载在空间域的连续移动。通过与Newmark方法和简单问题的解析解进行数值比较,表明用本文提出的方法可以用较粗的结构单元和较大的时间步长而获得很高的计算精度。在精度相同的前提下,计算效率比Newmark方法可提高1~2个数量级。     

Stress concentration around a spheroidal crack caused by a harmonic wave incident at an arbitrary angle

A method is proposed to study the stress concentration around a shallow spheroidal crack in an infinite elastic body. The stress concentration is due to the diffraction of a low-frequency plane longitudinal wave by the crack. The direction of wave propagation is established in which the combined concentration of mode I and mode II stresses is maximum __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 1, pp. 70–77, January 2006.     

Non‐centrosymmetric plasmonic crystals for second‐harmonic generation with controlled anisotropy and enhancement

Rectangular arrays of pyramidal recesses coated by silver film are investigated by means of polarization‐resolved nonlinear microscopy at 900 nm fundamental wavelength, demonstrating strong dependence of the dipole‐allowed SHG upon the lattice parameters. The plasmonic band gap causes nearly complete SHG suppression in arrays of 650 nm periodicity, whereas a sharp resonance at 550 nm periodicity is observed due to excitation of band edge Bloch states at fundamental frequency, accompanied by symmetry‐constrained interactions with similar modes at the second‐harmonic frequency. Additionally, coupling with modes at the bottom side of the silver film may lead to extraordinary optical transmission, opening a channel for SHG from the highly nonlinear GaAs substrate. Changing the lattice geometry enables SHG intensity modulation over three orders of magnitude, while the effective nonlinear anisotropy can be continuously switched between the two lattice directions, reaching values as high as ±0.96.

     

Plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram

Traditional detour‐phase hologram is a powerful optical device for manipulating phase and amplitude of light, but it is usually not sensitive to the polarization of light. By introducing the light‐metasurface interaction mechanism to the traditional detour phase hologram, we design a novel plasmonic nano‐slits assisted polarization selective detour phase meta‐hologram, which has attractive advantages of polarization multiplexing ability, broadband response, and ultra‐compact size. The meta‐hologram relies on the dislocations of plasmonic slits to achieve arbitrary phase distributions, showing strong polarization selectivity to incident light due to the plasmonic response of deep‐subwavelength slits. To verify its polarization sensitive and broadband responses, we experimentally demonstrate two holographic patterns of an optical vortex and an Airy beam at p‐ and s‐polarized light with wavelengths of 532nm, 633nm and 780nm, respectively. Furthermore, we realize an application example of the meta‐hologram as a polarization multiplexed photonic device for multi‐channel optical angular momentum (OAM) generation and detection. Such meta‐holograms could find widespread applications in photonics, such as chip‐level beam shaping and high‐capacity OAM communication.